|
|
|
| 1. |
Ide 2014-06-08 11:22:04
• This adapter offers bandwidth and flexibility by supporting
both 4- and 16-Mbps data rates over shielded and unshielded
twisted-pair wiring without requiring an external media filter.
• The adapter can be configured automatically with the
automatic configuration utility or manually with the 3C619C
software. There are no DIP switches to set.
• The adapter also provides full EISA configuration support.
• Automatic adapter configuration
• nCompliance with IEEE 802.5 standards
• 100% IBM compatibility
• Full duplex enabled
• Standard universal Boot PROM
• The TokenDiskdiskette is supplied with the adapter. It
includes the AutoLinkauto installation program, the
Configuration and Diagnostic Program, drivers, and driver
agents for TranscendPC Link SmartAgentsoftware. (0)
|
|
| |
| |
| 2. |
Ide 2014-06-09 10:55:28
 | BOOTROM ADDRESS | | Address | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | SW1/6 | | | C0000-C1FFFh | Off | On | On | On | On | On | | | C2000-C3FFFh | Off | On | On | On | On | Off | | | C4000-C5FFFh | Off | On | On | On | Off | On | | | C6000-C7FFFh | Off | On | On | On | Off | Off | | | C8000-C9FFFh | Off | On | On | Off | On | On | | | CA000-CBFFFh | Off | On | On | Off | On | Off | | » | CC000-CDFFFh | Off | On | On | Off | Off | On | | | CE000-CFFFFh | Off | On | On | Off | Off | Off | | | D0000-D1FFFh | Off | On | Off | On | On | On | | | D2000-D3FFFh | Off | On | Off | On | On | Off | | | D4000-D5FFFh | Off | On | Off | On | Off | On | | | D6000-D7FFFh | Off | On | Off | On | Off | Off | | | D8000-D9FFFh | Off | On | Off | Off | On | On | | | DA000-DBFFFh | Off | On | Off | Off | On | Off | | » | DC000-DDFFFh | Off | On | Off | Off | Off | On | | | DE000-DFFFFh | Off | On | Off | Off | Off | Off | | Note:CC000h is the factory setting, andDC000h is the recommended alternate setting. |
(0)
|
|
| |
| |
| 3. |
Ide 2014-06-09 10:56:06
| INTERRUPT
REQUEST |
| IRQ |
SW1/7 |
SW1/8 |
| »
|
2/9 |
On |
On |
|
|
3 |
On |
Off |
|
|
6 |
Off |
On |
|
|
7 |
Off |
Off |
(0)
|
|
| |
| |
| 4. |
Ide 2014-06-09 10:56:27
| I/O
BASE ADDRESS |
| Address |
SW2/1 |
| »
|
A20h |
Off |
|
|
A24h |
On |
(0)
|
|
| |
| |
| 5. |
Ide 2014-06-09 10:56:55
| SHARED
RAM CONFIGURATION |
| Size |
SW2/2 |
SW2/3 |
|
|
8KB |
On |
On |
| »
|
16KB |
Off |
On |
|
|
32KB |
On |
Off |
|
|
64KB |
Off |
Off |
| Note:This setting configures how much system
memory the card will use. |
(0)
|
|
| |
| |
| 6. |
Ide 2014-06-09 10:57:15
| NETWORK
SPEED |
| Speed |
SW2/4 |
|
|
4Mbps |
On |
| »
|
16Mbps |
Off |
| Note:All cards on a segment must have this
option set the same. |
(0)
|
|
| |
| |
| 7. |
Ide 2014-06-09 10:58:14
| DATA
BUS CONFIGURATION |
| Data Bus |
SW2/5 |
| 8-bit |
On |
| 16 bit |
Off |
(Switches SW2/6, SW2/7, and SW2/8 are reserved for future use) (0)
|
|
| |
| |