| USER CONFIGURABLE SETTINGS |
| Function | Location | Setting |
| » | Block Data Transfer mode | SW1/switch 1 | on |
| | IRQ-Paced Data Transfer mode | SW1/switch 1 | off |
| » | Read config. sector on drive 0 | SW1/switch 2 | on |
| | Read config. data in firmware | SW1/switch 2 | off |
| » | Floppy drive address 3F0-3F7h | SW1/switch 3 | off |
| | Floppy drive address 370-377h | SW1/switch 3 | on |
| » | Floppy drive enabled | SW1/switch 4 | off |
| | Floppy drive disabled | SW1/switch 4 | on |
| » | Single-speed floppy drive supported | SW1/switch 5 | off |
| | Dual-speed floppy drive supported | SW1/switch 5 | on |
| » | BIOS enabled | SW1/switch 6 | on |
| | BIOS disabled | SW1/switch 6 | off |
| » | BIOS address C800-C9FFh | SW2/switch 1 | off |
| | BIOS address CA00-CBFFh | SW2/switch 1 | on |
| » | Hard drive address 1F0-1F7h | SW2/switch 2 | off |
| | Hard drive address 170-177h | SW2/switch 2 | on |
| » | 256KB SIMM's supported | SW2/switch 6 | on |
| | 1MB SIMM's supported | SW2/switch 6 | off |
| » | Hard Drive Interrupt is IRQ14 | W1 | pins 1 & 2 closed |
| | Hard Drive Interrupt is IRQ10 | W1 | pins 2 & 3 closed |